Omron SYSDRIVE 3G3RV Series User Manual

I
ndividual Functions
6
-
1
29
K
KK
K Setting the V/f Pattern
In V/f control method, you can set the Inverter input voltage and the V/f pattern as the need arises.
nRelated Parameters
*1.These are values for a 200-V Class Inverter. Val ue s for a 400-V Class Inverter are double.
*2.The factory setting will change when the control method is changed. (V/f control factory settings are given.)
*3.The contents of parameters E1-11 and E1-12 are ignored when set to 0.00.
*4.E1-13 is set to the same value as E1-05 by autotuning.
*5.When C6-01 is set to 0, the upper limit of the setting range is 150.0 Hz.
*6.For (-E) models. Factory setting for base frequency is 50 Hz.
Param-
eter
Num-
ber
Name
Description
Setting
Range
Factory
Setting
Change
during
Opera-
tion
Control Methods
V/f
V/f
with
PG
Open
Loop
Vec-
tor
LCD Display
E1-01
Input voltage setting
Set the Inverter input voltage in 1 volt. This setting
is used as a reference value in protection func-
tions.
155 to
255
*1
200 V
*1
No Q Q Q
Input Voltage
E1-03
V/f pattern selection
0 to E: Select from the 15 preset V/f patterns.
F: Custom user-set patterns (Application for
settings E1-04 to E1-10.)
0 to F F No Q Q No
V/F Selection
E1-04
Max. output frequency
(FMAX)
To set V/f characteristics in a straight line, set the
same values for E1-07 and E1-09. In this case, the
setting for E1-08 will be disregarded.
Always ensure that the four frequencies are set in
the following manner:
E1-04 (FMAX) ≥ E1-06 (FA)
>E1-07 (FB) ≥ E1-09 (FMIN)
40.0 to
400.0 *5
60.0 Hz
(50.00
Hz)*6
No Q Q Q
Max Frequency
E1-05
Max. voltage (VMAX)
0.0 to
255.0
*1
200.0 V
*1
*2
No Q Q Q
Max Voltage
E1-06
Base frequency (FA)
0.0 to
400.0
60.0 Hz
(50.00
Hz)*6
No Q Q Q
Base Frequency
E1-07
Mid. output frequency
0.0 to
400.0
3.0 Hz
*2
No A A A
Mid Frequency A
E1-08
Mid. output frequency
voltage
0.0 to
255.0
15.0 V
*1
*2
No A A A
Mid Voltage A
E1-09
Min. output frequency
(FMIN)
0.0 to
400.0
1.5 Hz
*2
No Q Q Q
Min Frequency
E1-10
Min. output frequency
voltage
0.0 to
255.0
*1
9.0 V
*1
*2
No A A A
Min Voltage
E1-11
Mid. output frequency 2
Set only to fine-adjust V/f for the output range.
Normally, this setting is not required.
0.0 to
400.0
0.0 Hz
*3
No A A A
Mid Frequency B
E1-12
Mid. output frequency
voltage 2
0.0 to
255.0
*1
0.0 V
*3
No A A A
Mid Voltage B
E1-13
Base voltage
0.0 to
255.0
*1
0.0 V
*4
No A A Q
Base Voltage
Output voltage (V)
Frequency (Hz)

Omron SYSDRIVE 3G3RV Series Specifications

General

Brand	Omron
Model	SYSDRIVE 3G3RV Series
Category	Inverter
Language	English