Omron SYSDRIVE 3G3RV Series User Manual

P
arameter Tables
5
-
7
5
K
KK
K U: Monitor Parameters
The following settings are made with the monitor parameters (U parameters): Setting parameters for monitor-
ing in drive mode.
n Status Monitor Parameters: U1
The parameters used for monitoring status are listed in the following table.
*The unit is set in o1-03 (frequency units of reference setting and monitor).
Param-
eter
Number
Name
Description
Output Signal Level Dur-
ing Multi-Function Analog
Output
Min.
Unit
Control Methods
Register
LCD
Display
V/f
V/f
with
PG
Open
Loop
Vec-
tor
U1-01
Frequency
reference
Monitors/sets the fre-
quency reference value.*
10 V: Max. frequency
(0 to ± 10 V possible)
0.01
Hz
AAA 40H
Frequency
Ref
U1-02
Output fre-
quency
Monitors the output fre-
quency.*
10 V: Max. frequency
(0 to ± 10 V possible)
0.01
Hz
AAA 41H
Output Freq
U1-03
Output cur-
rent
Monitors the output current.
10 V: Inverter rated output
current
(0 to +10 V, absolute value
output)
0.1
A
AAA 42H
Output Cur-
rent
U1-04
Control
method
Checks the current control
method.
(Cannot be output.) - A A A 43H
Control
Method
U1-05
Motor speed
Monitors the detected motor
speed.*
10 V: Max. frequency
(0 to ± 10 V possible)
0.01
Hz
No A A 44H
Motor
Speed
U1-06
Output volt-
age
Monitors the output voltage
reference value in the
Inverter.
10 V: 200 VA C (400 VAC)
(0 to +10 V output)
0.1
V
AAA 45H
Output Vo l t-
age
U1-07
DC bus
voltage
Monitors the main DC volt-
age in the Inverter.
10 V: 400 VDC (800 VDC)
(0 to +10 V output)
1 VA A A 46H
DC Bus
Voltage
U1-08
Output
power
Monitors the output power
(internally detected value).
10 V: Inverter capacity
(max. applicable motor
capacity)
(0 to ± 10 V possible)
0.1
kW
AAA 47H
Output
kWatts

Omron SYSDRIVE 3G3RV Series Specifications

General

Brand	Omron
Model	SYSDRIVE 3G3RV Series
Category	Inverter
Language	English