Omron SYSDRIVE 3G3RV Series User Manual

P
arameter Tables
5
-
7
3
n Copy Function: o3
Parameters for the copy function are shown in the following table.
K
KK
K T: Motor Autotuning
The following settings are made with the motor autotuning parameters (T parameters): Settings for autotuning.
Param-
eter
Number
Name
Description
Setting
Range
Factory
Setting
Change
during
Opera-
tion
Control Methods
Register Page
LCD
Display
V/f
V/f
with
PG
Open
Loop
o3-01
Copy func-
tion selec-
tion
0: Normal operation
1: READ (Inverter to
Operator)
2: COPY (Operator to
Inverter)
3: Verify (compare)
0 to 3 0 No A A A 515H 6-137
Copy Func
Select
o3-02
Read per-
mitted
selection
0: Read prohibited
1: Read permitted
0 or 1 0 No A A A 516H 6-137
Copy
Allowable
Param-
eter
Number
Name
Description
Setting
Range
Factory
Setting
Change
during
Opera-
tion
Control Methods
Register Page
LCD
Display
V/f
V/f
with
PG
Open
Loop
T1-00
Motor 1/2
selection
Set the location where the
autotuned motor constants
are to be stored.
1: E1 to E2 (motor 1)
2: E3 to E4 (motor 2)
1 or 2 1 No No No A 700H 4-13
Select
Motor
T1-01
Autotuning
mode selec-
tion
Set the autotuning mode.
0: Rotational autotuning
1: Stationary autotuning
2: Stationary autotuning for
line-to-line resistance
only
0 to 2
*1
0 No AAA701H
4-11
4-13
Tuning
Mode Sel
T1-02
Motor out-
put power
Set the output power of the
motor in kilowatts.
0.00 to
650.00
0.40
kW
No A A A 702H 4-13
Mtr Rated
Power
T1-03
Motor rated
voltage
Set the rated voltage of the
motor in volts.
0 to
255.0
*2
200.0 V
*2
No No No A 703H 4-13
Rated Vol t-
age

Omron SYSDRIVE 3G3RV Series Specifications

General

Brand	Omron
Model	SYSDRIVE 3G3RV Series
Category	Inverter
Language	English