Omron SYSDRIVE 3G3RV Series User Manual

2
-
50
n3G3FV-PPGX2
The terminal specifications for the 3G3FV-PPGX2 are given in the following table.
*5 VDC and 12 VDC cannot be used at the same time.
K
KK
K Wiring
Wiring examples are provided in the following illustrations for the Control Cards.
n Wiring the 3G3FV-PPGA2
Wiring examples are provided in the following illustrations for the 3G3FV-PPGA2.
Fig 2.35 Wiring a 12-V Voltage Input
Table 2.28 3G3FV-PPGX2 Terminal Specifications
Terminal No. Contents Specifications
TA 1
1
Power supply for pulse generator
12 VDC (±5%), 200 mA max.*
20 VDC (GND for power supply)
35 VDC (±5%), 200 mA max.*
4A-phase + input terminal
Line driver input (RS-422 level input)
Maximum response frequency: 300 kHz
5A-phase - input terminal
6B-phase + input terminal
7B-phase - input terminal
8Z-phase + input terminal
9Z-phase - input terminal
10 Common terminal 0 VDC (GND for power supply)
TA 2
1A-phase + output terminal
Line driver output (RS-422 level output)
2A-phase - output terminal
3B-phase + output terminal
4B-phase - output terminal
5Z-phase + output terminal
6Z-phase - output terminal
7 Control circuit common Control circuit GND
TA3 (E) Shield connection terminal -
Three-phase, 200
VAC (400 VAC)
Inverter
+12 V power supply
0 V power supply
12 V voltage input (A/B phase)
Pulse 0 V
Pulse monitor output
R/L1
V/T2
W/T3
U/T1
V/T2
W/T3
4CN
4CN
E
E
1
2
3
4
5
6
7
8
TA1
TA2 (E)
3G3FV-PPGA2
E6B2-CWZ3E

Omron SYSDRIVE 3G3RV Series Specifications

General

Brand	Omron
Model	SYSDRIVE 3G3RV Series
Category	Inverter
Language	English