Omron SYSDRIVE 3G3RV Series User Manual

P
arameter Tables
5
-
9
Parameter Tables
K
KK
K A: Setup Settings
The following settings are made with the environment parameters (A parameters): Language displayed on the
Digital Operator, access level, control method, initialization of parameters.
n Initialize Mode: A1
Parameters for the environment modes are shown in the following table.
Param-
eter
Number
Name
Description
Setting
Range
Factory
Setting
Change
during
Opera-
tion
Control Methods
Register Page
LCD
Display
V/f
V/f
with
PG
Open
Loop
A1-00
Language
selection for
Digital
Operator
display
Used to select the language
displayed on the Digital
Operator (LED).
0:English
1:Japanese
2:German
3:French
4:Italian
5:Spanish
6:Portuguese
This parameter is not initial-
ized by the initialize opera-
tion.
0 to 6 1 YesAAA100H -
Select Lan-
guage
A1-01
Parameter
access level
Used to set the parameter
access level (set/read.)
0:Monitoring only
(Monitoring drive mode
and setting A1-01 and
A1-04.)
1:Used to select parameter
(Only parameters set in
A2-01 to A2-32 can be
read and set.)
2:Advanced
(Parameters can be read
and set in both quick
programming mode and
advanced programming
(A) mode.)
0 to 2 2 YesAAA101H
6-141
6-142
Access
Level
A1-02
Control
method
selection
Used to select the control
method for the Inverter
0: V/f control
1: V/f with PG feedback
(Pulse generator as
encoder)
2: Open loop vector
This parameter is not initial-
ized by the initialize opera-
tion.
0 to 2 0 No QQQ102H
4-7
4-9
4-18
Control
Method

Omron SYSDRIVE 3G3RV Series Specifications

General

Brand	Omron
Model	SYSDRIVE 3G3RV Series
Category	Inverter
Language	English