Omron SYSDRIVE 3G3RV Series User Manual

iv
!Caution Be sure to wire correctly and securely. Not doing so may result in injury or damage to
the product.
!Caution Be sure to firmly tighten the screws on the terminal block. Not doing so may result in
fire, injury, or damage to the product.
!Caution Do not connect any power source to the U, V, or W output. Doing so may result in
damage to the product or malfunction.
!Caution Do not connect a load to the motor when performing auto-tuning. Doing so may result
in personal injury or equipment damage.
Operation and Adjustment Precautions
!WARNING Turn ON the input power supply only after mounting the front cover, terminal covers,
bottom cover, Operator, and optional items. Not doing so may result in electrical
shock.
!WARNING Do not remove the front cover, terminal covers, bottom cover, Operator, or optional
items while the power is being supplied. Not doing so may result in electrical shock or
damage to the product.
!WARNING Do not operate the Operator or switches with wet hands. Doing so may result in elec-
trical shock.
!WARNING Do not touch the inside of the Inverter. Doing so may result in electrical shock.
!WARNING Do not come close to the machine when using the error retry function because the
machine may abruptly start when stopped by an alarm. Doing so may result in injury.
!WARNING Do not come close to the machine immediately after resetting momentary power inter-
ruption to avoid an unexpected restart (if operation is set to be continued in the pro-
cessing selection function after momentary power interruption is reset). Doing so may
result in injury.
!WARNING Provide a separate emergency stop switch because the STOP Key on the Operator is
valid only when function settings are performed. Not doing so may result in injury.
!WARNING Be sure confirm that the RUN signal is turned OFF before tuning ON the power sup-
ply, resetting the alarm, or switching the LOCAL/REMOTE selector. Doing so while the
RUN signal is turned ON may result in injury.
!Caution Be sure to confirm permissible ranges of motors and machines before operation
because the Inverter speed can be easily changed from low to high. Not doing so may
result in damage to the product.
!Caution Provide a separate holding brake when necessary. Not doing so may result in injury.
!Caution Do not perform a signal check during operation. Doing so may result in injury or dam-
age to the product.
!Caution Do not carelessly change settings. Doing so may result in injury or damage to the
product.

Omron SYSDRIVE 3G3RV Series Specifications

General

Brand	Omron
Model	SYSDRIVE 3G3RV Series
Category	Inverter
Language	English