(145)
CADD D01000 D02000 D03000
0000
00
351
The following table shows the format of calendar information. The format is the
same for the results output to R, R+1, and R+2.
Word Bits Contents Possible values
C 00 to 07 Seconds 00 to 59
08 to 15 Minutes 00 to 59
C+1 00 to 07 Hours 00 to 23 (24-hour system)
08 to 15 Day of month 01 to 31 (adjusted by month and for leap year)
C+2 00 to 07 Month 01 to 12
08 to 15 Year 00 to 99 (Rightmost two digits of year)
The following table shows the format of the time information.
Word Bits Contents Possible values
T 00 to 07 Seconds 00 to 59
08 to 15 Minutes 00 to 59
T+1 00 to 07 Hours 0000 to 9999
Precautions C, C+1, C+2, T, and T+1 must be BCD and in the proper format.
Note Refer to page 115 for general precautions on operand data areas.
Flags ER (A50003): Time or calendar data is not in the correct format
(including impossible dates such as Feb. 30).
Content of *DM word is not BCD when set for BCD.
EQ (A50006): ON when the content of R, R+1, and R+2 is 0 after execu-
tion.
Example When CIO 000000 is ON in the following example, the time data in D02000 and
D02001 is added to the calender data in D01000 through D01002 and output as
calender data to D03000 through D03002.
Address Instruction Operands
00000 LD 000000
00001 CADD(145)
D01000
D02000
D03000
90 07
28 18
40 30
1532
27 19
90 09
30 15
07 49
C + 2 : D01002
C + 1 : D01001
C : D01000
T + 1 : D02001
T : D02000
R + 2 : D03002
R + 1 : D03001
R : D03000
Time Instructions Section 5-26
To Next Page
Loading...
