1
About Exadata Server X10M
This section includes the server component overview.
The Exadata Server X10M is a (1) or (2) processor socket, AMD® EPYC E5 Genoa™ SP5
processor-based, 2U rackmount server. The X10M is available with either a 4-Drive
backplane [1] that supports up to four high performance NVMe drives or a 12-Drive
backplane [2] that supports up to twelve high capacity SAS-3 drives.
The X10M 4-Drive backplane configuration is available with either a 9-slot PCIe card back
panel or a Full Height PCIe card capable back panel configuration. The X10M 12-Drive
backplane configuration is available with a 9-slot PCIe card back panel. The 9-slot PCIe card
back panel server configuration supports (2) internal M.2 NVMe SSD modules.
Note:
Always update the server with the latest firmware, drivers, and other hardware-
related software by downloading the latest software release package when you first
receive the server, and for every new software release. For information about the
software release packages and how to download the software, refer to Getting
Firmware and Software.
These sections describe server controls, connectors, status indicators, system components,
and replaceable components.
Product Description
The system supports these components and configurations.
Exadata Server X10M is an enterprise-class, two rack unit (2U) server that supports multiple
configurations. Each configuration uses the same server but is provisioned differently. Some
supported features are specific to individual configurations, while other features are common
across configurations. Front and back panel configurations can include Exadata Server X10M
provisioned with:
1-1
To Next Page
Loading...
Need help?
General
