ii. Twist the tool back and forth to release the light pipe from the housing.
iii. Pull the light pipe away from the housing.
b. Install the light pipe on the replacement motherboard.
i. Match the rectangular holes on the outside of the light pipe with the
retaining clips on the housing.
ii. Push the light pipe onto the housing until the clips latch in the holes.
Install the Motherboard Assembly
1. Attach an antistatic wrist strap to your wrist, and then to a metal area on the
chassis.
See Take Antistatic Measures.
2. Carefully lift and place the motherboard assembly into the chassis.
Use the motherboard handle two holding points to grasp the motherboard.
Chapter 12
Install the Motherboard Assembly
12-12
To Next Page
Loading...
