E
Server Components
These sections describe Exadata Server X10M component names, status, and indicator
states. The tables in this section identify the system components and describe the naming
conventions applied to the components of Exadata Server X10M. Each section corresponds
to an IPMI entity ID and lists sensors, indicators, and replaceable units related to that entity.
The tables contain the following fields:
• Component Name – Shows the user-visible component name used in management
interfaces to refer to a specific sensor, indicator, or replaceable unit. The IPMI name is a
shortened form of the component name, and is indicated by the boldface portion of the
component name.
• IPMI Type – Indicates the type of sensor, indicator, or replaceable unit represented.
• Description – Describes the particular component name reference.
• Values – Defines the states of the sensor, indicator, or replaceable unit entity, and any
specific units or values that are expected, if applicable.
This section includes information for the following server components.
System Chassis Components
The following table lists the system chassis components.
Table E-1 System Chassis Components
Component Name
(Oracle ILOM CLI
Targets)
IPMI Type Description Values (if applicable)
/SYS
FRU Product information only
/SYS/UUID
FRU Unique system ID Derived from host MAC address.
Used for PXE boot and licensing.
/SYS/ACPI
State
sensor
Advanced Configuration and Power
Interface
01h-ACPI_ON_WORKING
20h-ACPI_SOFT_OFF
/SYS/VPS
Threshold
sensor
Virtual power consumption sensor Watts
/SYS/VPS_CPUS
Threshold
sensor
Virtual power sensor - CPU power
consumption
Watts
/SYS/VPS_MEMORY
Threshold
sensor
Virtual power sensor - memory power
consumption
Watts
/SYS/VPS_FANS
Threshold
sensor
Virtual power sensor - fan power
consumption
Watts
/SYS/T_AMB
Threshold
sensor
Ambient temperature on system
motherboard
Degrees Celsius
E-1
To Next Page
Loading...
