Force APCB Update
Force APCB Update Option Description
Force APCB Update Allows you to force an APCB update. By default, the option is
disabled.
Trusted Computing 2.0 Options
Note:
The Trusted Computing 2.0 options are available only when you enable the
Security TPM Device Support option.
Setup Option Description
TPM 2.0 Device Found Displays the firmware version and vendor for the TPM (Trusted
Platform Module) device.
Security TPM Device Support Enable (default) or disable Trusted Platform Module (TPM) support.
If disabled, the OS will not show TPM. Reset of the platform is
required.
Active PCR banks Displays active Platform Configuration Register (PCR) banks.
Available PCR banks Displays available Platform PCR banks.
SHA256 Bank Displays if the SHA256 PCR bank is enabled (default) or disabled.
Pending Operation Schedule an operation for the security device.
Note: Your computer reboots during restart to change the state of a
security device.
None (default), TPM Clear
Platform Hierarchy Enable (default) or disable platform hierarchy.
Storage Hierarchy Enable (default) or disable storage hierarchy.
Endorsement Hierarchy Enable (default) or disable endorsement hierarchy.
PSP Firmware Versions
PSP Firmware Versions Option Description
ABL Version Displays the AMD Boot Loader (ABL) version number.
PSP Bootloader Version Displays the Platform Security Processor (PSP) bootloader version.
SMU FW Version Displays the AMD System Management Unit firmware version (SMU
FW). The SMU is a microcontroller in the AMD EPYC processor that
handles real-time events such as power management.
SEV FW Version Displays the AMD Secure Encrypted Virtualization firmware version
(SEV FW).
PHY FW Version Displays the physical layer firmware (PHY FW) version.
MPIO FW Version Displays the mass production I/O firmware (MPIO FW) version.
Appendix F
Advanced Menu
F-2
To Next Page
Loading...
Need help?
General
