Oracle Exadata X10M User Manual

Configure UEFI Driver Settings
1. Access the BIOS Setup Utility menus.
2. In the BIOS Setup Utility menus, navigate to the IO menu.
3. On the IO screen, select either Internal Devices or Add In Cards and press
Enter to display the internal device or add-in card slot for which you want to
enable or disable the PCI-E UEFI Driver.
4. On the Internal Devices screen, select the internal device or add in card slot that
you want to configure.
5. On the PCI-E UEFI Driver Enable screen, select PCI-E UEFI Driver Enable and
press Enter. Do one of the following:
• Select Enabled to enable the PCI-E UEFI Driver setting.
• Select Disabled to disable the PCI-E UEFI Driver setting.
6. Press the F10 key to save the changes and exit the BIOS Setup Utility.
Configure Slot PCIe Connector
Configure the UEFI BIOS for 2x4 bifurcation on Oracle F640 Flash Card v3.
1. Access the BIOS Setup Utility menus.
2. In the BIOS Setup Utility menus, navigate to the IO menu.
3. On the IO screen, select PCIe Connector Special Configuration, and press
Enter to display the PCIe Connector Configuration Settings slots.
4. Specify the connector to control PCIe bifurcation and hotplug. On the PCIe
Connector Special Configuration screen, select the Slot 1-9 PCIe Connector
Configuration you want to configure and press Enter. Special configure this
slot's connectorPCIe SLOT Connector Configuration
5. On the Menu to Control PCIE connector Bifurcation and Hotplug
pop-up screen for that slot, select one of the following and press Enter.
• Select No Special connector configuration for this slot's PCIe
connector.
• Select x16 Bifurcation to enable x16 bifurcation special configuration in
this slot's PCIe connector.
• Select x8x8 Bifurcation to enable x8x8 bifurcation special configuration in
this slot's PCIe connector.
• Select x4x4x4 Bifurcation to enable x4x4x4 bifurcation special
configuration in this slot's PCIe connector.
• Select Hotplug_Enabled to enable PCIe card hotplug in this slot's PCIe
connector.
• Select Hotplug_Disabled to disable PCIe card hotplug in this slot's PCIe
connector.
• Select x4x4 HP ENABLED Aura-9 to enable x4x4x4 HP ENABLED Oracle
Flash Accelerator F640 PCIe Card v3 special configure this slot's PCIe
connector.
Chapter 18
Common BIOS Setup Utility Tasks
18-6

Oracle Exadata X10M Specifications

General

Brand	Oracle
Model	Exadata X10M
Category	Server
Language	English