Table C-4 (Cont.) Sun Rack II Model 1242 and Sun Rack II Model 1042 Rack
Specifications
Requirement Specification
Height 199.8 cm (78.66 inches)
Width (with side panels) 60 cm (23.62 inches)
Depth Model 1242 120 cm (47.24 inches)
Depth Model 1042 105.8 cm (41.66 inches)
Weight Model 1242 150.6 kg (332 lbs)
Weight Model 1042 123.4 kg (272 lbs)
Maximum dynamic load 1005 kg (2215 lbs)
Note:
Depth is measured from front door handle to back door handle.
Installation Procedure
This topic provides an overview of the Exadata Server X10M installation procedure. Review
the entire installation procedure and find links to more information about each step.
The following list summarizes the tasks that you must perform to properly install Exadata
Server X10M.
1. Review Known Issues for any late-breaking information about the server. Refer to Oracle
AMD-Based Cloud Servers Product Notes.
2. Confirm Installation Prerequisites. Prepare to install the server.
3. Install the server into a rack.
Rackmount the server. To rackmount the server, secure the rack to the floor, stabilize the
rack, and install the mounting brackets and slide rails. Install the server hardware.
4. Connect to the system. Attach cables and power cords to the server.
5. Power on the server.
6. Connect to Oracle Integrated Lights Out Manager (ILOM).
7. Install the operating system.
Installation Prerequisites
Prepare to install the server. Before you start the Rackmount Procedures or Reinstall the
Server Into the Rack, ensure that the following tasks are complete.
1. Review the server:
Features
Components
Appendix C
Installation Procedure
C-3
To Next Page
Loading...
