b. To clear the fault identified in previous step, type the following command: set
command
-> set /SYS/MB/P0 clear_fault_action=true
For example:
-> set /SYS/MB/P0 clear_fault_action=true
Are you sure you want to clear /SYS/MB/P0 (y/n)? y
Set ‘clear_fault_action’ to ‘true’
Alternatively, to clear all known faults in the server, log in to the Oracle ILOM service
processor from the Oracle ILOM Fault Management Shell and issue the fmadm
repair command.
For more information about how to use the Oracle ILOM Fault Management Shell
and supported commands, see the Oracle ILOM User's Guide for System Monitoring
and Diagnostics at Oracle ILOM Documentation.
Chapter 13
Install a Processor
13-19
To Next Page
Loading...
