Install the Front LED Indicator Module 15-3
16
Servicing SAS Cables
Remove SAS Storage Drive Cables 16-1
Install SAS Storage Drive Cables 16-2
17
Returning the Server to Operation
Server Filler Panel Requirements 17-1
Remove and Install Filler Panels 17-1
Install the Server Top Cover 17-2
Remove Antistatic Measures 17-3
Reinstall the Server Into the Rack 17-3
Return the Server to the Normal Rack Position 17-4
Reconnect Power and Data Cables 17-5
Power On the Server 17-5
18
Setting Up BIOS Configuration Parameters
Accessing the BIOS Setup Utility 18-1
BIOS Setup Utility Menus 18-1
BIOS Key Mappings 18-1
Access BIOS Setup Utility Menus 18-2
Navigate BIOS Setup Utility Menus 18-3
Using UEFI BIOS 18-3
Configuration Utilities for Add-In Cards 18-3
Configure and Manage BIOS Using Oracle ILOM 18-3
UEFI Secure Boot 18-4
Common BIOS Setup Utility Tasks 18-4
Verify BIOS Factory Default Settings 18-4
Select a Temporary Boot Device 18-5
Configure TPM Support 18-5
Configure UEFI Driver Settings 18-6
Configure Slot PCIe Connector 18-6
Configure UEFI Secure Boot 18-7
Configure AMD CBS (Custom BIOS Settings) 18-8
Restore Defaults 18-8
Exit BIOS Setup Utility 18-8
vii