2. Select a data type to be defined, enter the necessary information, and then click the
[Add]
button.
A DUT object for defining the selected data type will be added to the navigator pane.
Example: Adding a structure data type
3. Select an object to be added and enter definitions in the main pane.
How to define and use each data type is described below
.
Structure
The following is an example of declaring structures struct1 and strcut2. struct2 is an extended
structure of struct1.
To extend a structure before declaration, select the "Extends" check box in "Step 2" and enter
an extension declaration.
6.5 Variables
WUME-GM1RTXOP-01 6-21
To Next Page
Loading...
