Data set method
The current position is set as the home position.
High-speed home return
Executing high-speed home return enables the axis to move to the home position (position 0) of
the coordinate system for the absolute encoder
.
The behavior is similar to that of positioning. After home return is complete, the deviation
counter is not cleared.
Settings and behaviors of home return
■
Settings in GM Programmer
T
o use the home return function, specify various settings in "Home Return Settings" in axis
settings.
Specify the following settings according to the home return function to be used.
GM Programmer Value / Type Default
Home return method 0: DOG1
1: DOG2
2: DOG3
3: Limit method 1
4: Limit method 2
0: DOG1
11.2 Basic Preparations for Operation
11-22 WUME-GM1RTXOP-01
To Next Page
Loading...
