Name Icon Function
Properties Displays the properties.
Add Object
Adds an object.
Edit Object Opens an object.
Build Compiles an object in the application.
Login
Downloads the applications generated by code generation
to the GM1 controller at the time of login.
Logout Logs out from the device to which the user logged in.
Start Starts the application.
Stop
Stops the application.
Online Config Mode
Removes the applications downloaded to the GM1
controller and allows connection to the GM1 controller
.
Step Over
Executes the program line by line.
When a block (function or function block) is executed in
the block invocation location, the cursor moves to the next
line.
Step Into
Executes the program line by line.
When a block (function or function block) is executed in
the block invocation location, the cursor moves to the first
line of the called block.
Step Out
When the program is executed within the called block, the
execution continues until control returns to the calling
block.
When the program is executed outside the called block,
the execution continues until control returns to the
beginning of the program.
Run to Cursor
Executes the program up to the line specified by the
cursor
.
Set next Statement
Regards the line specified by the cursor as the next
statement to be executed and skips processes over to that
line.
Show next Statement
Jumps the cursor to the program line to be executed as
the next step.
Toggle Localization
Switches the language to the one enabled in [Default
Localization
] in the window displayed by selecting [Project
3.4 Component Names
WUME-GM1RTXOP-01 3-19
To Next Page
Loading...
