Panasonic GM1 - Page 488

Channel Type Description Remarks
Ch*_CaptureDifferen
ceValue
DINT
Ch* capture
differential value
Stores the value (Capture 1 value - Capture
0 value)
■
Ch*_StatusRegister (Ch* status register)
Channel Type Description Remarks
Ch*_OperationRead
yStatus
BOOL
Ch* operation ready
status
Indicates whether the count function is
ready to run.
0: Getting ready
, 1: Ready
CH*_CountEnableSt
atus
BOOL
Ch* count enable
status
Indicates whether count operation is in
progress.
0: Stopped, 1: Operation in progress
Ch*_CountDirection
Status
BOOL
Ch* count direction
status
Indicates the direction of counting.
0: Reverse rotation (decrementation
direction), 1: Forward rotation
(incrementation direction)
Ch*_Capture0Status BOOL Ch* capture 0 status
Indicates that the count value is stored as
capture 0 value at the rising edge or falling
edge of the control signal, whichever is
enabled.
Ch*_Capture1Status BOOL Ch* capture 1 status
Indicates that the count value is stored as
capture 1 value at the rising edge or falling
edge of the control signal, whichever is
enabled.
Ch*_ExternalOutput
0Status
BOOL
Ch* external output
0 status
Indicates the output status of external
output 0 signal.
0: Output OFF
, 1: Output ON
Ch*_ExternalOutput
1Status
BOOL
Ch* external output
1 status
Indicates the output status of external
output 1 signal.
0: Output OFF
, 1: Output ON
Ch*_InputAStatus BOOL Ch* input A status
Indicates the input status of input A signal.
0: Output OFF
, 1: Output ON
Ch*_InputBStatus BOOL Ch* input B status
Indicates the input status of input B signal.
0: Output OFF
, 1: Output ON
Ch*_InputZStatus BOOL Ch* input Z status
Indicates the input status of input Z signal.
0: Output OFF
, 1: Output ON
Ch*_Control0Status BOOL Ch* control 0 status
Indicates the input status of control 0
signal.
0: Output OFF
, 1: Output ON
Ch*_Control1Status BOOL Ch* control 1 status
Indicates the input status of control 1
signal.
0: Output OFF
, 1: Output ON
■
Ch*_ComparisonMatchRegister (Ch* comparison match flag)
Channel Type Description Remarks
Ch*_ComparisonMat
ch0Status
to
BOOL
Ch* comparison
match 0 flag
Outputs the result of the band comparison
function or target value match function.
0: Unmatched, 1: Matched
12.6 High-speed Counter Function
12-26 WUME-GM1RTXOP-01