Panasonic GM1 - Page 489

Channel Type Description Remarks
Ch*_ComparisonMat
ch15Status
to Ch* comparison
match 15 flag
■
OutputArea (output area)
Channel Type Description Remarks
Ch*_RequestRegist
er
WORD Ch* request register -
Ch*_TemporaryPres
etV
alue
DINT
Ch* temporary
preset value
Stores the value to replace the preset
value.
-2,147,483,648 to 2,147,483,647
Ch*_TemporaryCurr
entV
alue
DINT
Ch* temporary
current value
Stores the value to replace the count value.
-2,147,483,648 to 2,147,483,647
■
Ch*_RequestRegister (Ch* request register)
Channel Type Description
Validity
condition
Remarks
Ch*_OperationRead
yRequest
BOOL
Ch* operation ready
request
Level
Specifies whether to enable
operation preparation for the
count function.
0: Disable, 1: Enable
Ch*_CountEnableRe
quest
BOOL
Ch* count enable
request
Level
Specifies whether to enable
count operation.
0: Disable, 1: Enable
Ch*_ResetRequest BOOL Ch* reset request ON edge
Specifies whether to reset the
count value.
0: Do not reset
1: Reset
Ch*_PresetRequest BOOL Ch* preset request ON edge
Specifies whether to change the
count value to a preset value.
0: Do not change, 1: Change
Ch*_ResetEnableRe
quest
BOOL
Ch* reset enable
request
Level
Capture function:
Specifies whether to enable
reset count operation for the
input Z signal or comparison
match flag.
0: Disable, 1: Enable
Sampling capture function
Specifies whether to enable
reset count operation.
0: Disable, 1: Enable
Ch*_CurrentValueC
hangeRequest
BOOL
Ch* current value
change request
ON edge
Specifies whether to change the
count value to a temporarily
current value.
0: Do not change, 1: Change
Ch*_PresetValueCh
angeRequest
BOOL
Ch* preset value
change request
ON edge
Specifies whether to change the
preset value to a temporarily
preset value.
0: Do not change, 1: Change
12.6 High-speed Counter Function
WUME-GM1RTXOP-01 12-27