Compariso
n data
Target
value
Output setting
Compariso
n match 0
flag
Compariso
n match 1
flag
Compariso
n match 2
flag
Compariso
n match 3
flag
Addition reset pattern
Subtraction set pattern ○ ○
Subtraction reset pattern
3 +3,750
Addition set pattern ○
Addition reset pattern ○
Subtraction set pattern
Subtraction reset pattern ○
4 +5,000
Addition set pattern
Addition reset pattern ○
Subtraction set pattern ○ ○
Subtraction reset pattern ○ ○
5 +6,250
Addition set pattern ○
Addition reset pattern
Subtraction set pattern
Subtraction reset pattern ○
6 +7,500
Addition set pattern ○ ○
Addition reset pattern ○
Subtraction set pattern ○ ○
Subtraction reset pattern
7 +8,750
Addition set pattern
Addition reset pattern ○
Subtraction set pattern ○
Subtraction reset pattern
● The behavior of the comparison match flag that is performed when the count value reaches the
target value can be changed separately for incrementation and decrementation.
●
If the contents of comparison data 0 to 15 are duplicated and reset conditions are different,
comparison data is prioritized in the following order.
(High) 0 > 1 > 2 > 3 > 4 > 5 > 6 > 7 > 8 > 9 > 10 > 11 > 12 > 13 > 14 > 15 (Low)
Behavior of comparison match flag during incremental count
When the current value matches the comparison data, the comparison match flag behaves
according to the setting of "Addition set pattern" or "Addition reset pattern".
12.6 High-speed Counter Function
12-44 WUME-GM1RTXOP-01
To Next Page
Loading...
