Value Range
None, 80 ´ n (n=1–15) ms
Maintenance Console Location
9.24 PBX Configuration
—[1-1] Configuration—Slot—Card Property - LCO type
Feature Manual References
4.1.3 Caller ID
Caller ID—Caller ID (FSK) Detection Timer
Specifies the total time required by the PBX to detect Caller ID information. To enable this setting,
Caller
ID—Caller ID Signaling on this screen should be set to FSK.
Default
2000 ms
Value Range
1040 + (80 ´ n) (n=0–37) ms
Maintenance Console Location
9.24 PBX Configuration
—[1-1] Configuration—Slot—Card Property - LCO type
Feature Manual References
4.1.3 Caller ID
436 PC Programming Manual Document Version 2016-03
9.24 PBX Configuration—[1-1] Configuration—Slot—Card Property - LCO type
To Next Page
Loading...
