Panasonic KX-NS1000 - Page 434

Feature Manual References
4.1.3 Caller ID
Caller ID—Caller ID Signaling
Selects the type of Caller ID signaling provided by the telephone company.
Default
FSK
Value Range
FSK, FSK (with Visual Caller ID), DTMF
Maintenance Console Location
9.24 PBX Configuration
—[1-1] Configuration—Slot—Card Property - LCO type
Feature Manual References
4.1.3 Caller ID
Caller ID—Max Receive Time
Specifies the maximum number of Caller ID series that are sent from the network.
Default
1
Value Range
0 (no limit), 1, 2, 3
Maintenance Console Location
9.24 PBX Configuration
—[1-1] Configuration—Slot—Card Property - LCO type
Feature Manual References
4.1.3 Caller ID
Caller ID—Caller ID (FSK) Carrier Detection
Enables
the PBX to detect the carrier when receiving Caller ID. To enable this setting,
Caller ID—Caller ID
Signaling on this screen should be set to FSK.
Default
Enable
Value Range
Disable, Enable
434 PC Programming Manual Document Version 2016-03
9.24 PBX Configuration—[1-1] Configuration—Slot—Card Property - LCO type