Panasonic KX-NS1000 - Page 509

PT Display—PT Last Display Duration in Idle Mode
Specifies the length of time that the current information remains on the display after the extension returns to
idle status.
Default
5
Value Range
1–15 s
Maintenance Console Location
10.3 PBX Configuration
—[2-3] System—Timers & Counters
Air Synchronization—Watching Degeneracy (x60s)
Specifies the length of time that a Slave CS can maintain an ongoing call after air synchronization is lost.
Default
300
Value Range
60 ´ n (n=0–300) s
Maintenance Console Location
10.3 PBX Configuration
—[2-3] System—Timers & Counters
Programming Manual References
19.2.1 PBX Configuration—[11-2-1] Maintenance—CS Synchronization—Air Synchronization
Voice Mail (Caller from VM to CO)—On-hook Wait Time
Specifies
the length of time from when the voice mail seizes a CO line (for example, to transfer a call) until the
voice mail goes on hook. If the time specified here is too short, the voice mail will be unable to dial the number
and make a connection.
Default
10
Value Range
1–30 s
Maintenance Console Location
10.3 PBX Configuration—[2-3] System—Timers & Counters
Feature Manual References
20.1.2 UNIFIED MESSAGING FEATURES
Document Version 2016-03 PC Programming Manual 509
10.3 PBX Configuration—[2-3] System—Timers & Counters