Panasonic KX-NS1000 - Page 532

Maintenance Console Location
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main
Feature Manual References
6.1.1 EFA (External Feature Access)
SIP Refer(Blind)
Specifies the feature number used to perform a blind transfer from the PBX to the SIP CO line.
Note
This feature is not available from a SIP extension.
Default
*61
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan
—Main
Feature Manual References
18.1.2 SIP (Session Initiation Protocol) Extension
COLR Set / Cancel
Specifies the feature number used to set or cancel COLR, which suppresses the presentation of the called
party’s number to the caller.
Default
*7*0
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan
—Main
Programming Manual References
9.27 PBX Configuration—[1-1] Configuration—Slot—Port Property - PRI Port—Supplementary Service—
COLP, CLIR, COLR, CNIP, CONP, CNIR, CONR, CF (Rerouting), CT, CCBS, E911
Feature Manual References
4.1.15 CLIP (Calling Line Identification Presentation)
532 PC Programming Manual Document Version 2016-03
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main