PG Drives Technology R-NET OMNI - Page 108

PG D RIVES T ECHNOLOGY O MNI – A DVANCED -P ROGRAMMING
SK78813/5
108
If the Omni is setup as:
Position 1 = Drive
Position 1 Type = List
Position 1 = 1beep
Position 2 = 2 beeps
Then the User Menu would appear as:
1: Profile 1
2: Profile 2
3: Profile 3
Seating
For the top 3 lines, there would only be 1 beep, as those lines all relate to
Position 1. For the fourth line, there would be 2 beeps, as that line effectively
relates to Position 2. Therefore, in this instance, a more sensible programming
arrangement may be.
Position 1 = Drive
Position 1 Type = List
Position 1 = 0 beep
Profile Identifier # = On
Position 2 = 4 beeps
This would result in 1 to 3 beeps for the first 2 lines and 4 beeps for the fourth
line.