PG Drives Technology R-NET OMNI User Manual

PG D RIVES T ECHNOLOGY O MNI – S TANDARD - O PERATION
SK78813/5
63
If the error is in a non-active module, for example in the ISM but with a drive
Profile selected, then drive will still be possible, however, the diagnostic screen
will appear intermittently.
11.4.9.1 Identified Module
This identifies which module of the control system has registered the problem.
PM Power Module
JSM Joystick Module
ISM Intelligent Seating/lighting Module
OMNI Omni
11.4.9.2 Trip Text
The Trip Text gives a brief description of the trip type.
11.4.9.3 Trip Code
The 4 digit code displayed gives the exact trip that has been recorded.
11.4.9.4 Diagnostic Procedure
Please follow this procedure:
• Read and note the Trip Text displayed, the identified Module and
the Trip Code.
• Switch off the control system.
• Make sure that all connectors on the listed Module and the
wheelchair are mated securely.
• Check the condition of the battery.
• Find the definition of the Trip Code in the Service Guide, and take
the required action.

PG Drives Technology R-NET OMNI Specifications

General

Brand	PG Drives Technology
Model	R-NET OMNI
Category	Wheelchair
Language	English