PG Drives Technology R-NET OMNI User Manual

PG D RIVES T ECHNOLOGY O MNI – W ARNING S UMMARY
SK78813/5
170
2.3 Installing the SID onto a Powerchair
The SID should be fitted to the powerchair in
accordance with the instructions of both the SID and
powerchair manufacturers. PG Drives Technology
accept no liability for losses of any kind resulting
from an incorrect installation of a SID. Chapter 1
section 6.
2.4 User Switch
For a truly fail-safe system a normally closed User
Switch is recommended. This ensures that, if the
switch becomes accidentally disconnected the
powerchair will default to a stopped condition. It is
possible to configure the Omni to function with
normally open switch types, see section User Switch
in the Programming chapter for details. PG Drives
Technology recommend that, whenever possible, a
normally closed switch should be used. If a normally
open switch is used the responsibility for that
decision lies with the healthcare professional. PG
Drives Technology accept no liability for any losses
resulting from the use of a non-normally closed User
Switch.
Because a disconnected User Switch means there is
no emergency stop function, PG Drives Technology
recommend that Switch Detect is always set to On.
PG Drives Technology will accept no liability for any
losses resulting from any other setting of this
parameter. Chapter 1 section 6.2.
2.5 D-type Connector
The SID’s D-type connector should always be fitted
with gold contacts and a suitable backshell with
locking screws. The locking screws should be used to

PG Drives Technology R-NET OMNI Specifications

General

Brand	PG Drives Technology
Model	R-NET OMNI
Category	Wheelchair
Language	English