PG Drives Technology R-NET OMNI - Programming - Introduction; User Switch; Switch Detect; Diagnostics - Introduction

PG D RIVES T ECHNOLOGY O MNI – W ARNING S UMMARY
SK78813/5
172
2.9 Programming - Introduction
Programming should only be conducted by healthcare
professionals with in-depth knowledge of PGDT
control systems. Incorrect programming could result
in an unsafe set-up of a wheelchair for a user. PGDT
accept no liability for losses of any kind if the
programming is inappropriate for the SID type or
user. Chapter 3 section 1.
2.10 User Switch
PGDT recommend the use of a normally-closed User
Switch. PGDT accept no liability for losses of any
kind arising from the use of any other type of switch.
Chapter 3 section 2.4.1.
2.11 Switch Detect
PGDT recommend this parameter is always set to On.
PGDT accept no liability for losses of any kind arising
from any other setting. Chapter 3 section 2.4.2.
2.12 Diagnostics - Introduction
Diagnostics should only be conducted by healthcare
professionals with in-depth knowledge of PGDT
electronic control systems. An incorrect or badly
effected repair could result in an unsafe set-up of a
wheelchair. PGDT accept no liability for losses of any
kind arising from an incorrect or badly effected repair.
Chapter 5 section 1.