PG Drives Technology R-NET OMNI - 1 9-way D Type Pin-out

PG D RIVES T ECHNOLOGY O MNI – S PECIFICATIONS
SK78813/5
161
The information in this section can be used to design
Specialty Input Devices compatible with the Omni. The
input device manufacturer must ensure that the SID
design is safe under all conditions, in particular, single
component failures must be detected and the input
device put into a safe condition. PG Drives Technology
accept no responsibility for losses of any kind
resulting from an unsuitable SID design.
1 9-way D Type Pin-out