PG Drives Technology R-NET OMNI User Manual

PG D RIVES T ECHNOLOGY O MNI – S TANDARD - O PERATION
SK78813/5
50
8 Speed Adjust Mode
A Speed Adjust Mode screen as shown below will appear if the User Control
parameter has been set to Sequence. Left and Right SID commands will adjust
the maximum speed setting.
The User Switch exits to the next available menu entry.
It is not advisable to program the menu option, ‘speed
adjust’ if the Sequence method is being used with a
Single Switch Scanner Type SID. Refer to the
Programming Chapter for further details.
9 Lighting Control Mode
While in Lighting Control Mode, a screen as below will appear. Forward and
Reverse SID commands will select each lighting function. A Left or Right SID
command will switch on the function. Another Left or Right SID command will
switch the function off.

PG Drives Technology R-NET OMNI Specifications

General

Brand	PG Drives Technology
Model	R-NET OMNI
Category	Wheelchair
Language	English