PG Drives Technology R-NET OMNI User Manual

PG D RIVES T ECHNOLOGY O MNI – W ARNING S UMMARY
SK78813/5
169
1 Introduction
This section summarises all of the very important warnings for use that appear
throughout the text of this manual. Do not install, maintain or operate the
Omni+ controller without reading, understanding and observing the following
warnings. Failure to observe these warnings could result in UNSAFE CONDITIONS
for the user of a wheelchair or affect the reliability of the Omni+ controller. PG
Drives Technology accepts no liability for losses of any kind arising from failure to
comply with any of the conditions in the warnings listed below.
The wheelchair manufacturer may wish to use this
section as a check list, to ensure that the risk areas
identified below have been addressed within their own
chair designs and associated documentation.
2 Warnings
2.1 Introduction
Programming and diagnostics should only be
conducted by healthcare professionals with in-depth
knowledge of PG Drives Technology electronic control
systems. Incorrect programming could result in an
unsafe setup of a vehicle for a user. PG Drives
Technology accept no liability for any losses of any
kind if the programming of the control system is
altered from the factory preset values. Chapter 1
section 1.
2.2 Assessing the User’s Needs
This should only be conducted by a healthcare
professional. PG Drives Technology accept no liability
for losses of any kind resulting in an incorrect
assessment of a user’s abilities. Chapter 1 section 4.

PG Drives Technology R-NET OMNI Specifications

General

Brand	PG Drives Technology
Model	R-NET OMNI
Category	Wheelchair
Language	English