PG Drives Technology R-NET OMNI User Manual

PG D RIVES T ECHNOLOGY O MNI – S TANDARD - P ROGRAMMING
SK78813/5
87
If set to Left/Right, then a left SID command will select the available
actuator axes and a right SID command will move the selected axis.
The direction of movement is changed via a short operation of the
right SID command within the period defined by the parameter, Auto
Toggle Time.
If set to Right/Left, then a right SID command will select the available
actuator axes and a left SID command will move the selected axis. The
direction of movement is changed via a short operation of the left SID
command within the period defined by the parameter, Auto Toggle
Time.
2.8 Omni – User Menu
2.8.1 Position 1 to Position 16
This sets the position of menu items within the User Menu. The User Menu can
have up to 16 lines. If any of the values are edited, the following additional
window will appear.

PG Drives Technology R-NET OMNI Specifications

General

Brand	PG Drives Technology
Model	R-NET OMNI
Category	Wheelchair
Language	English