PG Drives Technology R-NET OMNI - Page 88

PG D RIVES T ECHNOLOGY O MNI – S TANDARD - P ROGRAMMING
SK78813/5
88
The programmable options are: Blank, each of the standard R-net Modes and
each of the Omni Modes – Exit, Speed Adjust, Sleep, Lights and Settings.
If set to Blank, then there will be no menu item displayed.
If set to Exit, then selecting that option will take you back to Drive Mode.
Below is an example of programming:
Position 1: Seating Position 6: Exit
Position 2: Drive Position 7: Blank
Position 3: Speed Adjust |
Position 4: Drive Position 16: Blank
Position 5: Settings
The User Menu would appear as follows: