PG D
RIVES
T
ECHNOLOGY
O
MNI
– S
TANDARD
- I
NSTALLATION
SK78813/5
9.3 Order of User Menu or Sequence
Using the programmable parameter, Position 1 to Position 16, it is possible to
change the order of the options on the User Menu. The User Menu can have a
maximum of 16 lines and the content of each of the lines is set by these
parameters. If the Sequence method is being employed, then these
parameters set the order of the sequence.
A further programmable option for the Menu method of operation is Return To.
This parameter sets whether an operation of the User Switch while in a non-Drive
Mode takes the user back to drive or back to the User Menu.
The function of some of the options in the User Menu is also programmable.
Refer to section Position 1 Type to Position 16 Type in the Programming chapter
for full details.
9.4 Display Background
The color of the Omni screen background can be altered via the
programmable parameter Background. There are currently two options, Blue or
White.
Blue is the standard Omni graphical display.
White is the High Contrast display, ideal for use outside or in brightly lit
environments.
It is also possible for the user to choose the color of the screen background via
the Settings Menu.
If set to Blue, the background will always be blue regardless of the
setting shown in the parameter Background.
If set to White, the background will always be white regardless of the
setting shown in the parameter Background.
If set to Auto, the colour of the background in each profile will be as
shown in the parameter Background.
To Next Page
Loading...
Need help?
General
