PG Drives Technology R-NET OMNI User Manual

PG D RIVES T ECHNOLOGY O MNI – IR
SK78813/5
112
2 User Menu
IR Mode is accessed in the normal way of Mode selection, i.e. operation of the
R-net system’s Mode button or command.
IR Mode will only be available if IR Codes have been stored in the Omni. There
are two ways to store IR Codes in the Omni – by ‘learning’ codes from IR
handsets or by programming from the PC based IR Configuration Tool, refer to
sections 4 and 7 for respective details of each method.
When an IR Omni is dispatched from PGDT there are
no stored IR Codes.
If IR Mode is not available and there are stored IR
Codes, then refer to section 8, Configuration.
On entering IR Mode the user will be presented with a list of available IR
Appliances, such as below.
When an IR Omni is dispatched from PGDT, it will
contain a default menu as shown in section 9. If
required, the IR Configuration tool can be used to
change this default menu.

PG Drives Technology R-NET OMNI Specifications

General

Brand	PG Drives Technology
Model	R-NET OMNI
Category	Wheelchair
Language	English