Philips HeartStart XL+ - Features and Capabilities

1: Introduction Features and Capabilities
2
Features and Capabilities
The HeartStart XL+ is a lightweight, portable, defibrillator/monitor. It provides four clinical modes of
operation: Monitor, Manual Defibrillation, AED, and Pacer (optional).
Monitor Mode you can monitor up to three ECG waveforms at a time, acquired through a 3- or 5-lead
ECG set or multifunction electrode pads. Optional monitoring of pulse oximetry (SpO
2
), end-tidal CO
2
(EtCO
2
), and non-invasive blood pressure (NBP) are also available. Measurements from these parameters
are presented on the display and alarms are available to alert you to changes in the patient’s condition.
You can also display the Vital Signs Trending Report to view key monitoring parameters and their
measurements.
Manual Defibrillation Mode offers simple, 3-step defibrillation. You analyze the patient’s ECG and, if
appropriate: 1) select an energy setting, 2) charge, and 3) deliver the shock. Defibrillation may be
performed using paddles or multifunction electrode pads. Manual Defibrillation Mode also allows you to
perform synchronized cardioversion and internal defibrillation.
In AED Mode, the HeartStart XL+ analyzes the patient’s ECG and determines whether a shock is
advised. Voice prompts guide you through the 3-step defibrillation process, providing easy-to-follow
instructions and patient information. Voice prompts are reinforced by messages that appear on the
display.
The AED Mode incorporates the Philips’ SMART Analysis algorithm for ECG analysis and SMART
Biphasic waveform for defibrillation.
Optional Pacer Mode offers non-invasive transcutaneous pacing therapy. Pace pulses are delivered
through multifunction electrode pads using a monophasic waveform in Demand or Fixed modes.
The HeartStart XL+ is powered by a rechargeable lithium-ion battery. Available battery power is easily
determined by viewing the battery power indicators located on the device display and the battery itself.
An AC power supply may serve as a secondary power source and for continual battery charging.
The HeartStart XL+ performs Automated Tests on a regular basis. The status of the device’s critical
functions is reported to the Ready For Use (RFU) indicator. The RFU indicator communicates the status
of your device, letting you know if it is operating correctly, needs attention, or is unable to deliver
therapy. In addition, the manually performed Operational Check ensures that every part of the
HeartStart XL+ functions properly.
The HeartStart XL+ automatically stores critical event and trend data in its internal memory. The
HeartStart XL+ also enables you to copy data and event information to a USB flash drive for
downloading to a compatible data management solution.
The HeartStart XL+ is highly configurable to better meet the needs of diverse users. Be sure to familiarize
yourself with the device’s configuration before servicing the HeartStart XL+.