13 Monitoring Temperature Calculating Temp Difference
174
Extended Temperature Label Set
The following additional labels are available if Label Set is set to Full. This setting can only be
changed in Configuration Mode.
Note that if your monitor is connected to an Information Center, the additional labels in the extended
label set may not be correctly displayed. See the Configuration Guide for your monitor for more
information.
Calculating Temp Difference
The monitor can calculate and display the difference between two temperature values by subtracting
the second value from the first. The difference is labeled
Temp.
1 In the Main Setup menu, select Measurements.
2 In the Setup Temp menu, select First Temp.
3 Label the measurement source as appropriate.
4 Select Second Temp.
5 Label the measurement source as appropriate.
T1, T2, T3, T4 Non-specific temperature labels
Tamb ambient temperature
Tcereb cerebral temperature
Ttymp tympanic temperature
Tvesic vesical temperature
To Next Page
Loading...
Need help?
General
