20 Event Surveillance Annotating Events
226
The Event Episode window shows four minutes of high-resolution event information.
The event values to the left of the measurement channels show the trigger threshold set and the
maximum amount by which this limit was exceeded. In this example, Brady 104<110 tells you
that 104 was the lowest HR value measured during the event time and that the low HR trigger
threshold was set to 110 when the event was triggered. If the event was manually triggered, the event
value boxes display “manual”.
Annotating Events
1 To annotate an event, in the Event Episode window, select the pop-up key Select Annotatn.
2 Select the required annotation from the pop-up list of available annotations for the currently active
event group.
Up to 20 annotations can be configured to let you add commonly-used clinical notes to event episodes
for documentation purposes. To see the complete list of available annotations, in the Event Setup
menu, select Event Annotation.
Documenting Events
You can print a report or make a recording of the events history stored in the database or of individual
event episodes or a Car Seat Assessment Record.
Documenting Event Review
1 In the Event Review window, select the pop-up key Print/Record. This calls up the
event documentation pop-up keys.
Follow-on event
values
Trigger event values,
highlighted
Active event group
Timeline, showing
episode Pre/Post-
time
Event Episode
HR
Brady
104 < 110
SpO
2
Desat
71 < 85
Resp
NER
7 Jul
To Next Page
Loading...
Need help?
General
