Philips IntelliVue MP5 - Environmental Specifications; Monitor Performance Specifications

31 Installation and Specifications Monitor Performance Specifications
304
Environmental Specifications
The monitor may not meet the performance specifications given here if stored or used outside the
specified temperature and humidity ranges.
The monitor is protected against ingress of objects and fluids according to IEC 60529 IP32 (except
monitors with the predictive temperature unit). However, do not expose the monitor directly to heavy
rain.
When the monitor and related products have differing environmental specifications, the effective range
for the combined products is that range which is common to the specifications for all products.
Monitor Performance Specifications
Item Condition Range
Temperature Range Operating 0 to 40°C (32 to 104°F)
Storage
-20 to 60°C (-4 to 140°F)
Transportation
1
1.Short-term storage during shipment.
-20 to 60°C (-4 to 140°F)
Temperature Range with
IntelliVue 802.11 Bedside
Adapter or IntelliVue
Instrument Telemetry
Wireless Network or
when charging the battery
Operating
0 to 35°C (32 to 95°F)
Temperature Range with
Predictive Temperature
Unit
Operating 10 to 40°C (50 to 104°F)
Storage
-20 to 50°C (-4 to 120°F)
Humidity Range Operating 15 % to 95 % Relative Humidity (RH) (non condensing)
Storage
5 % to 90 % Relative Humidity (RH)
Transportation
5 % to 90 % Relative Humidity (RH)
Altitude Range Operating -500 m to 3000 m (10000 ft)
Storage
-500 m to 4600 m
2
(15000 ft)
2.Sufficient for flight altitudes up to 12,000 m with pressurized cabins.
Transportation -500 m to 4600 m
2
(15000 ft)
Ingress Protection Monitor without the
predictive temperature
unit
IP32 (protected against ingress of water when the water is
dripping vertically and the monitor is tilted up to 15° and
protected against contact with or ingress of objects larger than
2.5 mm)
Monitor with the
Predictive
Temperature Unit
IPX1 (protection against ingress of water when the water is
dripping vertically)
Performance Specifications
Power Specifications Power consumption <40 W average
<65 W peak
Line Voltage
100 to 240 V ~
Current
1.3 to 0.7 A
Frequency
50/60 Hz ~