Planet GSD-1002M User Manual

User’s Manual of GSD-1002M
■ Supports Spanning Tree Protocol
- STP (Spanning Tree Protocol)
- RSTP (Rapid Spanning Tree Protocol)
- MSTP (Multiple Spanning Tree Protocol)
- STP BPDU Guard, BPDU Filtering and BPDU Forwarding
■ Supports Link Aggregation
 IEEE 802.3ad Link Aggregation Control Protocol (LACP)
 Cisco ether-channel (Static Trunk)
 Maximum 8 trunk groups, up to 8 ports per trunk group
■ Provides Port Mirror (many-to-1)
■ Loop protection to avoid broadcast loops
Quality of Service
■ Ingress / Egress Rate Limit per port bandwidth control
■ Storm Control support
 Broadcast / Unknown-Unicast / Unknown-Multicast
■ Traffic classification:
- IEEE 802.1p CoS
- TOS / DSCP / IP Precedence of IPv4/IPv6 packets
■ Strict priority and Weighted Round Robin (WRR) CoS policies
Multicast
■ Supports IGMP Snooping v2 and v3
■ Supports MLD Snooping v1, v2
■ IGMP Querier mode support
■ IGMP Snooping port filtering
■ MLD Snooping port filtering
Security
■ Authentication
 IEEE 802.1X Port-based network access authentication
 Built-in RADIUS client to co-operate with the RADIUS servers
 RADIUS / TACACS+ login user access authentication
■ Access Control List
 IPv4 / IPv6 IP-based ACL
 MAC-based ACL
■ MAC Security
 Static MAC
 MAC Filtering
■ Port Security for Source MAC address entries filtering
■ DHCP Snooping to filter distrusted DHCP messages
■ Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
■ IP Source Guard prevents IP spoofing attacks
14

Planet GSD-1002M Specifications

General

Brand	Planet
Model	GSD-1002M
Category	Switch
Language	English