User’s Manual of GSD-1002M
1.3 How to Use This Manual
This User Manual is structured as follows:
Section 2, INSTALLATION
The section explains the functions of the Switch and how to physically install the Managed Switch.
Section 3, SWITCH MANAGEMENT
The section contains the information about the software function of the Managed Switch.
Section 4, WEB CONFIGURATION
The section explains how to manage the Managed Switch by Web interface.
Section 5, SWITCH OPERATION
The chapter explains how to does the switch operation of the Managed Switch.
Section 6, TROUBSHOOTING
The chapter explains how to trouble shooting of the Managed Switch.
Appendix A
The section contains cable information of the Managed Switch.
1.4 Product Features
Physical Ports
■ Eight 10/100/1000Mbps Gigabit Ethernet ports with auto-MDI/MDI-X supported
■ 1 port (Port 8) supports 802.3af / at PoE 48~56V DC in-line power
■ Two 100/1000Base-X mini-GBIC/SFP slots
Installation
Dual Power Design
- 802.3af / at PoE In
- 12V DC power adapter acceptable
0 to 50 degrees C operating temperature
Layer 2 Features
■ Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
■ High performance Store and Forward architecture, broadcast storm control, runt/CRC filtering eliminates erroneous
packets to optimize the network bandwidth
■ Supports VLAN
- IEEE 802.1Q tagged VLAN
- Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
- Protocol VLAN
- Voice VLAN
- Private VLAN
- Management VLAN
- GVRP
13
To Next Page
Loading...
Need help?
General
