User’s Manual of GSD-1002M
4.9.2 RADIUS Server
This page is to configure the RADIUS server connection session parameters. The RADIUS Settings screens in Figure 4-9-10,
Figure 4-9-11 & Figure 4-9-12 appears.
Figure 4-9-10 Use Default Parameters page screenshot
The page includes the following fields:
Object Description
Ti
meout is the number of seconds, in the range 1 to 10, to wait for a reply from a
RADIUS server before retransmitting the request.
ï‚· Retries
Retransmit is the number of ti
mes, in the range 1 to 30, a RADIUS request is
retransmitted to a server that is not responding. If the server has not responded
after the last retransmit it is considered to be dead.
ï‚· Timeout for Reply
ï‚· Dead Time
The Dead Time, which can be set to a number between 0 and 3600 seconds, is
the period during which the switch will not send new requests to a server that has
failed to respond to a previous request. This will stop the switch from continually
trying to contact a server that it has already determined as dead.
Setting the Dead Time to a value greater than 0 (zero) will enable this feature, but
only if more than one server has been configured.
The secret ke
y - up to 63 characters long - shared between the RADIUS server
and the switch.
ï‚· Key String
Buttons
: Click to apply changes.
202
To Next Page
Loading...
Need help?
General
