Planet GSD-1002M User Manual

User’s Manual of GSD-1002M
The page includes the following fields:
Object Description
Displa
y the current community type.
 Community Name
Displa
y the current SNMP access group’s name.
 Group Name
Displa
y the current view name.
 View Name
Displa
y the current access type.
 Access Right
 Delete
: Delete the community entry.
4.2.7.6 SNMP User
Configure SNMPv3 users table on this page. Each SNMPv3 user is defined by a unique name. Users must be configured with a
specific security level and assigned to a group. The SNMPv3 group restricts users to a specific read, write, and notify view. The
entry index key is User Name. The SNMPv3 User Setting screens in Figure
4-2-29 & Figure 4-2-30 appear.
Figure 4-2-29 SNMPv3 Users Configuration page screenshot
The p
age includes the following fields:
Object Description
 User Name
A string identifying the user name that this entry should belong to.
The allowed string length is 1 to 16.
The SNMP
Access Group. A string identifying the group name that this entry
should belong to.
 Group
 Privilege Mode
Indicates the security model that this entry should belong to. Possible security
models are:
 NoAuth: None authentication and none privacy.
 Auth: Authentication and none privacy.
 Priv: Authentication and privacy.
The value of security level cannot be modified if entry already exists. That means
you must first ensure that the value is set correctly.
 Authentication
Protocol
Indicates the authentication protocol that this entry should belong to. Possible
authentication protocols are:
 None: None authentication protocol.
59

Planet GSD-1002M Specifications

General

Brand	Planet
Model	GSD-1002M
Category	Switch
Language	English