Planet GSD-1002M - Page 204

User’s Manual of GSD-1002M
Set the server priority
.
 Server Priority
 Dead Time
The Dead Time, which can be set to a number between 0 and 3600 seconds, is
the period during which the switch will not send new requests to a server that has
failed to respond to a previous request. This will stop the switch from continually
trying to contact a server that it has already determined as dead.
Setting the Dead Time to a value greater than 0 (zero) will enable this feature, but
only if more than one server has been configured.
 Usage Type
Set the usage type. The following modes are available:
 Login
 802.1X
 All
Buttons
: Click to add Radius server setting.
Figure 4-9-12 Login Authentication List page screenshot
The page includes the following fields:
Object Description
Displa
y the current IP address
 IP Address
Displa
y the current auth port
 Auth Port
Displa
y the current acct port
 Acct Port
Displa
y the current key
 Key
Displa
y the current timeout
 Timeout
Displa
y the cunnent retry times
 Retries
Displa
y the current priority
 Priority
Displa
y the current dead time
 Dead Time
Displa
y the current usage type.
 Usage Type
 Modufy
Click
to edit login authentication list parameter.
Click
to delete login authentication list entry.
204