User’s Manual of GSD-1002M
Figure 4-12-10 Voice Auto Mode Configuration and Network Policy Configuration page screenshot
The page includes the following fields:
Object Description
ï‚· LLDP MED Policy for
Voice Application
Set the LLDP MED policy for voice application mode.
Select netw
ork policy number for this drop down list.
ï‚· Network Policy
Number
ï‚· Application Type
Intended use of the application types:
Voice - for use by dedicated IP Telephony handsets and other similar appliances
supporting interactive voice services. These devices are typically deployed on a
separate VLAN for ease of deployment and enhanced security by isolation from
data applications.
Voice Signaling - for use in network topologies that require a different policy for
the voice signaling than for the voice media. This application type should not be
advertised if all the same network policies apply as those advertised in the Voice
application policy.
Guest Voice - support a separate 'limited feature-set' voice service for guest
users and visitors with their own IP Telephony handsets and other similar
appliances supporting interactive voice services.
Guest Voice Signaling - for use in network topologies that require a different
policy for the guest voice signaling than for the guest voice media. This
application type should not be advertised if all the same network policies apply as
those advertised in the Guest Voice application policy.
281
To Next Page
Loading...
Need help?
General
