User’s Manual of GSD-1002M
41
hexadecimal digits with a colon separates each field (:). For example,
'fe80::215:c5ff:fe03:4dc7'.
The symbol '::' is a special syntax that can be used as a shorthand way of
representing multiple 16-bit groups of contiguous zeros; but it can only appear
once. It also used a following legally IPv4 address. For example, '::192.1.2.34'.
To
enable this Managed Switch to accept a configuration from a Dynamic Host
Configuration Protocol version 6 (DHCPv6) server. By default, the Managed
Switch does not perform DHCPv6 client actions. DHCPv6 clients request the
delegation of long-lived prefixes that they can push to individual local hosts.
DHCPv6 Client
Buttons
: Click to apply changes.
Figure 4-2-5 IPv6 Information page screenshot
The page includes the following fields:
Object Description
Displa
y the current auto configuration state.
Auto Configuration
IPv6 In Use Address
Display the current IPv6 in-use address
Displa
y the current in-use gateway
IPv6 In Use Router
Displa
y the current IPv6 static address
IPv6 Static Address
Displa
y the current IPv6 static gateway
IPv6 Static Router
Displa
y the current DHCPv6 client status.
DHCPv6 Client
To Next Page
Loading...
