Planet IGS-10020MT - Port Classification

User’s Manual of IGS-10020MT
4.9.3 Port Classification
This page allows you to configure the basic QoS Ingress Classification settings for all switch ports. The Port Classification
screen in Figure 4-9-2 appears.
Figure 4-9-2 : QoS Ingress Port Classification Page Screenshot
The page includes the following fields:
Object Description
 Port
The port number for which the configuration below applies.
 QoS Class
The Configuration All with available values will assign to whole ports.
Controls the default QoS class, i.e., the QoS class for frames not classified in any
other way. There is a one to one mapping between QoS class, queue and priority.
A QoS class of 0 (zero) has the lowest priority. All means all ports will have one
specific setting.
 DP Level
The Configuration All with available values will assign to whole ports.
Controls the default DP level, i.e., the DP level for frames not classified in any
other way. All means all ports will have one specific setting.
 PCP
The Configuration All with available values will assign to whole ports.
Controls the default PCP for untagged frames. A
ll mea
ns all ports will have one
specific setting.
 DEI
The Configuration All with available values will assign to whole ports.
Controls the default DEI for untagged frames. A
ll
means all ports will have one
specific setting.
 Tag Class
Shows the classification mode for tagged frames on this port.
Disabled: Use default QoS class and DP level for tagged frames.
190