User’s Manual of IGS-10020MT
IPv6 AUTOCINFIG
Description:
Set or show the IPv6 AUTOCONFIG mode.
Syntax:
IP IPv6 AUTOCONFIG [enable|disable]
Parameters:
enable : Enable IPv6 AUTOCONFIG mode
disable: Disable IPv6 AUTOCONFIG mode
Default Setting:
disable
Example:
Enable IPv6 autoconfig function:
IGS-10020MT:/>ip ipv6 autoconfig enable
IPv6 Setup
Description:
Set or show the IPv6 setup.
Syntax:
IP IPv6 Setup [<ipv6_addr>] [<ipv6_prefix>] [<ipv6_router>]
Parameters:
<ipv6_addr> : IPv6 address is in 128-bit records represented as eight fields of up to four hexadecimal digits with a colon
separates each field (:). For example, four hexadecimal digits with a colon separates each field (:). For
example, 'fe80::215:c5ff:fe03:4dc7'. The symbol '::' is a special syntax that can be used as a shorthand
way of representing multiple 16-bit groups of contiguous zeros; but it can only appear once. It also used a
following legally IPv4 address. For example,'::192.1.2.34'.
<ipv6_prefix>: IPv6 subnet mask , default: Show IPv6 prefix
<ipv6_router>: IPv6 router , default: Show IPv6 router. IPv6 address is in 128-bit records represented as eight fields of up
to four hexadecimal digits with a colon separates each field (:). For example, 'fe80::215:c5ff:fe03:4dc7'.
The symbol '::' is a special syntax that can be used as a shorthand way of representing multiple 16-bit
groups of contiguous zeros; but it can only appear once. It also used a following legally IPv4 address. For
example,'::192.1.2.34'.
351
To Next Page
Loading...
