Planet IGS-10020MT - Security Switch SNMP Trap Inform Retry Times; Security Switch SNMP Trap Probe Security Engine ID

User’s Manual of IGS-10020MT
Default Setting:
1
Example:
Set SNMP trap inform timeout in 20sec.
IGS-10020MT:/>security switch snmp trap inform timeout 20
Security Switch SNMP Trap Inform Retry Times
Description:
Set or show the SNMP trap inform retry times.
Syntax:
Security Switch SNMP Trap Inform Retry Times [<retries>]
Parameters:
<retries>: SNMP trap inform retransmited times (0-255)
(default: Show SNMP trap inform retry times)
Default Setting:
5
Example:
Set SNMP trap inform retry times in 10.
IGS-10020MT:/>security switch snmp trap inform retry times 10
Security Switch SNMP Trap Probe Security Engine ID
Description:
Show SNMP trap security engine ID probe mode.
Syntax:
Security Switch SNMP Trap Probe Security Engine ID [enable|disable]
Parameters:
enable : Enable SNMP trap security engine ID probe
disable: Disable SNMP trap security engine ID probe
(default: Show SNMP trap security engine ID probe mode)
400